Search
Filters
Close

Insert System

View as Grid List
Sort by

TLX-TL-SM3C-HD

Share-Me under-table switcher & receiver with 3 HDMI inputs

 

Share-Me™ Switcher/Receiver Set with 3 HDMI Inputs

Bumblelion and Eleroo, Moosel and Rhinokey, and Butterbear and Hoppopotamus. What's so great about these? They are awesome combinations of animals whose different parts make them better. The TL-SM3C-HD is the Wuzzle of AV.

The TL-SM3C-HD is a combination of a three input switcher, extender, and control system designed for small conference and meeting rooms.

At the table: The transmitter gets mounted underneath your conference table.  Install and connect the Share-Me™ grommets that fit your application (sold separately).  The grommets provide a location to plug your cable in, as well as simple control of input select and display power.  If you want to control the audio level of the display as well as power, you can use a TL-SMG-4C and connect it to the transmitter as well.

To the display:  Connect the transmitter to the receiver with a single twisted pair cable (shielded solid core Cat 5e or greater).  This allows the transmitter and receiver to be up to 70m apart and simplifies cabling to the display.  The transmitter receives all the power it needs from the receiver over this cable, so you won't need an outlet to power the transmitter separately.

At the display: The receiver gets mounted by your display (projector or TV).  Connect the display to the receiver with an HDMI cable and you are basically ready to go!  The system can control your display using CEC right out of the box.  If you don't have CEC on your display (like a projector) you can use the web interface to configure IR or RS232.  If you have an electric projection screen, you can use the built-in relays to make the screen go up and down in sync with the display power.

With TechLogix Networx Share-Me™ systems, get an affordable solution that integrates audio, video, and display control.

 

  • Three HDMI inputs
  • One HDMI output
  • Video extension up to 70 meters
  • Manual or automatic switching modes
  • IR, RS232, and CEC display control
  • Momentary or latching relays for screen control
  • Wall/under table mounting kit included
  • Quick connect ports for table insert integration
  • Transmitter powered via the receiver

TLX-TL-SM3C-HDV

Share-Me under-table switcher & receiver with 2 HDMI & 1 VGA inputs

 

Share-Me™ Switcher/Receiver Set with 2 HDMI and 1 VGA Inputs

Bumblelion and Eleroo, Moosel and Rhinokey, and Butterbear and Hoppopotamus. What's so great about these? They are awesome combinations of animals whose different parts make them better. The TL-SM3C-HD is the Wuzzle of AV.

The TL-SM3C-HDV is a combination of a three input switcher, extender, and control system designed for small conference and meeting rooms.

At the table: The transmitter gets mounted underneath your conference table.  Install and connect the Share-Me™ grommets that fit your application (sold separately).  The grommets provide a location to plug your cable in, as well as simple control of input select and display power.  If you want to control the audio level of the display as well as power, you can use a TL-SMG-4C and connect it to the transmitter as well.

To the display:  Connect the transmitter to the receiver with a single twisted pair cable (shielded solid core Cat 5e or greater).  This allows the transmitter and receiver to be up to 70m apart and simplifies cabling to the display.  The transmitter receives all the power it needs from the receiver over this cable, so you won't need an outlet to power the transmitter separately.

At the display: The receiver gets mounted by your display (projector or TV).  Connect the display to the receiver with an HDMI cable and you are basically ready to go!  The system can control your display using CEC right out of the box.  If you don't have CEC on your display (like a projector) you can use the web interface to configure IR or RS232.  If you have an electric projection screen, you can use the built-in relays to make the screen go up and down in sync with the display power.

With TechLogix Networx Share-Me™ systems, get an affordable solution that integrates audio, video, and display control.

 

  • Two HDMI inputs
  • One VGA with Audio Input
  • One HDMI output
  • Video extension up to 70 meters
  • Manual or automatic switching modes
  • IR, RS232, and CEC display control
  • Momentary or latching relays for projection screen control
  • Wall/under table mounting kit included
  • Quick connect ports for table insert integration
  • Transmitter powered via the receiver

TLX-TL-SM3X1-HD

Share-Me 3x1 HDMI switcher

 

3x1 Collaboration Switcher with HDMI Inputs

We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…

The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…
 
TechLogix Share-Me™ Series presentation switchers redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with a compatible table insert, the Share-Me™ Series under-table mounted switcher provides both AV switching and display control for the cost of most 40" displays using innovative table insert controllers and a professional-grade switcher.

 
Table inserts (sold separately) are available for HDMIVGA and DisplayPort source devices, providing connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training.
 
Simply put, an entire meeting can be run with only two buttons: an "on/off" button which turns the switcher and the display on or off, and a "share-me" button which switches the active input channel to the table insert on which the button was pressed.
 
The system also features automatic switching for sources that are not connected to the table inserts, such as media players, fixed PCs, or document cameras. When a source is connected and/or powered on, the system will recognize the input and automatically switch to that channel.
 
The TechLogix Share-Me™ Series is also designed for an extremely quick installation. Simply mount the switcher under the podium or conference room table, mount the table inserts in pre-cut holes sized from 56mm through 60mm, and connect the table inserts to the switcher using standard AV cables (HDMI, DisplayPort, or VGA) and a 3.5mm cable. All power and control commands are sent from the table inserts to the switcher via the 3.5mm cable, and all display on/off commands are sent from the switcher to the display via CEC over an HDMI cable.

 

  • Three HDMI inputs
  • One HDMI output
  • Manual or automatic switching modes
  • HDMI ports support DisplayPort and MHL
  • CEC display control
  • Under table mounting kit included
  • Quick connect ports for table insert integration

TLX-TL-SM3X1-HDV

Share-Me 3x1 HDMI & VGA switcher

 

3x1 Collaboration Switcher with HDMI and VGA Inputs

We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…

The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…
 
TechLogix Share-Me™ Series presentation switchers redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with a compatible table insert, the Share-Me™ Series under-table mounted switcher provides both AV switching and display control for the cost of most 40" displays using innovative table insert controllers and a professional-grade switcher.

 
Table inserts (sold separately) are available for HDMIVGA and DisplayPort source devices, providing connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training.
 
Simply put, an entire meeting can be run with only two buttons: an "on/off" button which turns the switcher and the display on or off, and a "share-me" button which switches the active input channel to the table insert on which the button was pressed.
 
The system also features automatic switching for sources that are not connected to the table inserts, such as media players, fixed PCs, or document cameras. When a source is connected and/or powered on, the system will recognize the input and automatically switch to that channel.
 
The TechLogix Share-Me™ Series is also designed for an extremely quick installation. Simply mount the switcher under the podium or conference room table, mount the table inserts in pre-cut holes sized from 56mm through 60mm, and connect the table inserts to the switcher using standard AV cables (HDMI, DisplayPort, or VGA) and a 3.5mm cable. All power and control commands are sent from the table inserts to the switcher via the 3.5mm cable, and all display on/off commands are sent from the switcher to the display via CEC over an HDMI cable.

 

  • Two HDMI inputs
  • One VGA/Audio Input
  • One HDMI output
  • Manual or automatic switching modes
  • HDMI ports support DisplayPort and MHL
  • CEC display control
  • Under table mounting kit included
  • Quick connect ports for table insert integration

 

TLX-TL-SMC

Share-Me control cable

 

Share-Me™ control cable

  • Connects the 3x1 collaboration switchers to the table inserts
  • Pre-terminated 3.5mm connections on both ends
  • Provides control and powers the inserts
  • Stock lengths from 1 – 10 ft.
  • Custom lengths available

TLX-TL-SMG-2B

Share-Me table insert with two-button control

 

Two-Button Share-Me™ Grommet Insert

We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…

The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…

TechLogix Share-Me™ Series table inserts redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with a compatible presentation switcher, the Share-Me™ Series system provides both AV switching and display control for the cost of most 40" displays.

Table inserts provide connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training. With just one of two simple buttons, anybody using the room can turn on and off the display. The other button is the Share-Me™ button which immediately switches to the input on that specific grommet.

 

  • 3.5mm control outputs on bottom
  • Buttons for display on/off and switching
  • Fits 2.25” (57mm) table grommet hole
  • Fully powered through 3.5mm control cable
  • Mounts securely to the table

Filter by:

Clear All