Search
Filters
Close

Twisted Pair

View as Grid List
Sort by

TLX-TL-TP100-HDC2

18G HDMI & Control over Twisted Pair Cable Extender -- 100m

 

18G HDMI, Audio, & Control over Twisted Pair Cable Extender Set -- 100m

The TechLogix TL-TP100-HDC2 revolutionizes high-bandwidth HDMI signal distribution by transmitting 18G HDMI signals, including HDR and 4K@60 4:4:4, up to 100m (330 ft.) over shielded twisted pair cabling (Category 5e or greater). 

The system works by lightly compressing signals above 10G for twisted pair transport, and then uncompressing the signal at the destination end.

Flexible options for ARC (Audio Return Channel) allow the receiver to accept HDMI, analog, or digital optical.  The transmitter can output the audio on HDMI, analog, or digital optical outputs. 

Additional built-in features such as flexible power with Port-Saver™ protection, IR and RS232 signal distribution, and Ethernet pass-through make the TL-TP100-HDC2 extremely powerful and extremely flexible.

The set includes a power supply with international adapters and mounting brackets.

 

  • 18G HDMI (4K@60) up to 100m
  • ARC on HDMI, Analog, and Optical Inputs and Outputs
  • Deep color, DTS-HD, Dolby TrueHD compatible
  • HDR compatible
  • Light compression (2:1 ratio) on signals over 10G
  • Single twisted pair transmission
  • HDMI 2.0 / HDCP 2.2
  • Built-in RS232, IR & Ethernet transmission
  • Ethernet ports on send & receive
  • Diagnostic LEDs

TLX-TL-TP40-HDC2

18G HDMI & Control over Twisted Pair Cable Extender -- 40m

 

18G HDMI & Control over Twisted Pair Cable Extender Set -- 40m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP40-HDC2 replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 130 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP40-HDC2 to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

 

  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • 18G 4K@60 4:4:4 compatible
  • 130 ft. (40m) max distance for 4K
  • 220 ft. (70m) max distance for 1080p
  • Embedded bi-directional IR and RS232 control
  • System powered from either the transmitter or receiver
  • HDMI 2.0 and HDCP 2.2 compliant
  • CEC & HDR compatible
  • Light compression (2:1 ratio) on signals over 10G

TLX-TL-TP50-HDIR

HDMI & IR over Shielded Twisted Pair Cable Extender -- 50m

Economy HDMI & IR over Twisted Pair Cable Extender Set -- 50m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP50-HDIR replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 165 feet. Plus, built-in IR control signal embedding allow you to also transmit IR commands from the remote room to the equipment rack or source device.  

In actual practice, this means you can use the TL-TP50-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

 

  • Requires shielded twisted pair cabling & shielded connectors
  • Transmit HDMI & IR over a single twisted pair cable
  • Extend 1080p HD up to 165 ft. (50m)
  • Embedded IR control from the display to the source
  • HDMI 1.4 compatible
  • HDCP 1.4 compatible
  • Deep color, DTS-HD, Dolby TrueHD & 3D support
  • HDMI local display loop out on the transmitter
  • Built-in mounting ears
  • Built-in EDID copying & configuration

TLX-TL-TP70-HDARC

HDMI & IR over Twisted Pair Cable Extender -- 70m

HDMI w/ ARC & IR over Twisted Pair Cable Extender Set -- 70m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDARC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDARC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

  • Transmit HDMI & IR over a single twisted pair cable
  • Extend 1080p HD up to 230 ft. (70m.)
  • Extend 4K@30 HD up to 130 ft. (40m.)
  • Embedded bi-directional IR control
  • System powered from either the transmitter or receiver
  • Audio Return Channel (ARC)
  • TechLogix port-saver power circuit design

 

TLX-TL-TP70-HDC

HDMI & Control over Twisted Pair Cable Extender -- 70m

HDMI & Control over Twisted Pair Cable Extender Set -- 70m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

 

  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • Extend 1080p HD up to 230 ft. (70m.)
  • Extend 4K@30 HD up to 130 ft. (40m.)
  • Embedded bi-directional IR and RS232 control
  • System powered from either the transmitter or receiver

Filter by:

Clear All