Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65, front panel mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Not compatible to SMPTE 344M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Features & Benefits
•Suggested OEM equipment connector due to LC front compatibility
•Designed as feedthrough with automatic sealing shutter
•Shutter with silicone gasket protects optical connection from dust and dirt
•Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
•Accommodates standard LC connectors on the rear for simple installation
•Connection on the front side either by rugged opticalCON or standard LC connector
•The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
•Water resistant according to IP65 ingress protection in mated condition
•In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
•Color coded rubber sealing to identify fiber mode:
Multimode - black
Single mode PC - blue
Single mode APC - green
The SYNTAX® AUDIO MULTIPAIR cables are developed for high-standard professional applications in the rigorous environments of the audio & video installations, studio recording and musical entertainment, everywhere excellent electrical and mechanical properties are required. The pairs are twisted and jacketed; the external PVC jacket of each pair is individually numbered. All jacketed pairs are inside an outer PVC sheath whose internal talc dusted lined ridges allow the cores to slide against one other, yet maintain them properly clustered even under heavy usage and continuous rewinding. This solves the problems of twisting and knotting of the cores while keeping the right cable flexibility. The XLPE conductor insulation is particularly resistant to high temperatures, so as to avoid warping or shrinkage when soldering. The aluminium/polyester foil shield provides a 100% screen and the drain wire inside allows fast installation. All the conductors are made of High Purity Oxigen Free Copper. The extra-flexible PVC external jacket is anti-trampling and anti-scratch for usage at either extremely low or high temperatures, ranging from -30°C up to +70°C.
The preassembled etherCON CAT6 patch cables use a shielded S/FTP cable with cable plug carrier offering a robust metal shell and Push-Pull locking system.
Attention! Intermates ONLY with NE8FDY-C6* Cat 6 receptacles.
Not compatible with CAT5 and CAT6A chassis connectors.
Features & Benefits
•CAT6 compliant - data rate up to 10 GBit/s
•CAT6 performance - fast data transmission and high bandwidth applications
•CAT6 specifications according TIA / EIA 568B, ISO / IEC 11801, EN 50173
•IP65 - Dust and waterproof in mated condition
•Shielded system - high noise immunity and EMI protection
•Push Pull mating - secure and proven locking system
•Ready made patch cables with rugged cable carrier and unique chuck-type strain relief
