Female BNC 75 ? input - male XLR cable end 110 ? output. Interface balanced and coaxial lines.
Female BNC 75 ? input - male XLR cable end 110 ? output. Interface balanced and coaxial lines.
Features & Benefits
•Allow long cable runs for digital audio signals via low attenuation coax lines
•Match balanced to coaxial lines
•Match impedances 110 ? to 75 ?
•Simple to use, passive units
SPK SYNTAX® connectors are available in the 8 pin configuration, fully intermateable with the widely used CA-COM connectors. SPK SYNTAX® allow the conveyance of high electric power signal to professional loudspeakers. The design presents the same key features of SVK Series, and can be supplied with rubber covered locking ring and with gold plated solder-type contacts.
The SPK SYNTAX® connectors are solidly-built so to ensure long term reliability. Moreover, they do not present the shortcomings of older connectors still used in industrial or military environments.
Order number 2181
EAN/pcs 4024941021814
Product Group TE plug with MULTI-GRIP cable gland
Amperage 63A
Poles 3p (2P+PE)
Earth 'Clock' Position 6 h
Voltage 200 up to 250V
Frequency 50 and 60Hz
Protection IP67
Color code blue RAL 5015
Connection Design Screw Terminal as box terminal
Max. conductor 16,0 mm²
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
![artn-2181[1].JPG](https://axept.be/images/thumbs/0647428_bal-2181_360.jpeg "BAL-2181")
