etherCON CAT6A feedthrough coupler for cable extensions.
Features & Benefits
•Ruggedized coupler with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
•IP65 protected when mated with NE8MX6*
•Accommodates standard RJ45 plug
•Revolutionary small form factor
•The adapter offers the million-fold proven robust latch lock system
•The adapters are problem solvers for various intermating problems for professional and semi-professional applications
The protection cap is linked to its lodge through a special high-resistance cable made up of seven stainless strands, covered by anti-scratch black teflon tubing
Miniature transformer balancing adapter, 3 pole XLR female - 1/4" jack, ground lifted
Miniatur transformer balancing adapters
Low cost solution for unbalanced/balanced line conversion and passive DI applications, where no earth or gain switching is required
Audio transformer 1:1
Impedance ratio: 200:200
Source/load impedance in Ohm: 200/2k, (600/10k)
Max. Input level (@ 50 Hz, 1% THD): -3 dBu
Features & Benefits
•The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
•Rugged aluminium extrusion housing for best reliability
The protection cap is linked to its lodge through a special high-resistance cable made up of seven stainless strands, covered by anti-scratch black teflon tubing
Order number 2189
EAN/pcs 4024941021890
Product Group TE plug with MULTI-GRIP cable gland
Amperage 63A
Poles 5p (3p+N+PE)
Earth 'Clock' Position 6 h
Voltage 200/346 up to 240/415V
Frequency 50 and 60Hz
Protection IP67
Color code red RAL 3000
Connection Design Screw Terminal as box terminal
Max. conductor 16,0 mm²
The protection cap is linked to its lodge through a special high-resistance cable made up of seven stainless strands, covered by anti-scratch black teflon tubing
Artikelnummer 09 38 006 2601
Beschrijving Han K 4/2 Pin Male Insert 4 80 Amp & 2 H
Type sheet PDFPDF
Identification
Category
Inserts
Series
Han-Com®
Identification
Han® K 4/2
Termination method
Screw termination
Version
Gender
Male
Size
16 B
Number of contacts
4
Additional contacts
+ 2 additional signal contacts
PE contact
Yes
Technical characteristics
Conductor cross-section
1.5 ... 16 mm²
Electrical data acc. to IEC 61984
80 A 830 V 8 kV 3
Rated current
80 A
Rated voltage
830 V
Rated impulse voltage
8 kV
Pollution degree
3
Electrical data, signal
16 A 400 V 6 kV 3
Rated current (signal)
16 A
Rated voltage (signal)
400 V
Rated impulse voltage (signal)
6 kV
Pollution degree (signal)
3
Rated voltage acc. to UL
600 V
Rated voltage acc. to UL (signal)
600 V
Rated voltage acc. to CSA
300 V
Rated voltage acc. to CSA (signal)
300 V
Contact resistance
? 0.3 m?
Contact resistance, signal area
? 1 m?
Limiting temperature
-40 ... +125 °C
Mating cycles
? 500
Flammability acc. to UL 94
V-0
Material properties
Material (insert)
Polycarbonate
Colour (insert)
RAL 7032 (pebble grey)
Material (contacts)
Copper alloy
Surface (contacts)
Silver plated
Net weight
119.2 g
RoHS
compliant with exemption
Specifications and approvals
Specifications
IEC 61984
EN 60664-1
Approvals
UL 1977 ECBT2.E235076
GL
Yes
SPK and SVK are compliant with Mil C 5015 VG 95234 and are commonly used by many speaker enclosure manufacturers. They are available with rubber-covered or metal loocking rings. SPK connectors are fully intermateble with CA-COM connectors.
Order number 3124
EAN/pcs 4024941031240
Product Group TE connector MULTI-GRIP Cable gland
Amperage 63A
Poles 5p (3p+N+PE)
Earth 'Clock' Position 6 h
Voltage 200/346 up to 240/415V
Frequency 50 and 60Hz
Protection IP67
Color code red RAL 3000
Connection Design Screw Terminal as box terminal with Kontex-contact
Max. conductor 16,0 mm²
SPK SYNTAX® connectors are available in the 8 pin configuration, fully intermateable with the widely used CA-COM connectors. SPK SYNTAX® allow the conveyance of high electric power signal to professional loudspeakers. The design presents the same key features of SVK Series, and can be supplied with rubber covered locking ring and with gold plated solder-type contacts.
The SPK SYNTAX® connectors are solidly-built so to ensure long term reliability. Moreover, they do not present the shortcomings of older connectors still used in industrial or military environments.
Female BNC 75 ? input - male XLR chassis connector 110 ? output. Interface balanced and coaxial lines.
Features & Benefits
•Allow long cable runs for digital audio signals via low attenuation coax lines
•Match balanced to coaxial lines
•Match impedances 110 ? to 75 ?
•Simple to use, passive units
PANEL - Specific housing for protection cap lacing are moulded on the plastic body of the flange. IP2X finger protection prevents accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling. Suited for front or rear panel mount. M12 thread ensures cable attachment. Phase/line and safety information are embossed on connector’s shell.
PANEL - Specific housing for protection cap lacing are moulded on the plastic body of the flange. IP2X finger protection prevents accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling. Suited for front or rear panel mount. M12 thread ensures cable attachment. Phase/line and safety information are embossed on connector’s shell.
