Female BNC 75 ? input - male XLR cable end 110 ? output. Interface balanced and coaxial lines.
Female BNC 75 ? input - male XLR cable end 110 ? output. Interface balanced and coaxial lines.
Features & Benefits
•Allow long cable runs for digital audio signals via low attenuation coax lines
•Match balanced to coaxial lines
•Match impedances 110 ? to 75 ?
•Simple to use, passive units
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Inline versions
SPZ is the ultimate connector for cluttered and/or narrow spaces. As for the design, we took special care in reducing dimensions.
The handgrip has been reduced in size, without losing the unprecedented gripping quality of the SPX series. The SPZ connectors (source or drain) are equipped with IP2X - finger protection against direct contact with live parts.
Cables 25 mm² to 95 mm² are connected to the contact through a set screw termination.
Cable retention is provided by an M40 plastic cable gland. The cable gland is IP68 watertight and has a clamping range of 15 to 28 mm.
Technical features, electrical phase and safety instructions are embossed on the connector's shell.
Order number 2181
EAN/pcs 4024941021814
Product Group TE plug with MULTI-GRIP cable gland
Amperage 63A
Poles 3p (2P+PE)
Earth 'Clock' Position 6 h
Voltage 200 up to 250V
Frequency 50 and 60Hz
Protection IP67
Color code blue RAL 5015
Connection Design Screw Terminal as box terminal
Max. conductor 16,0 mm²
SPK SYNTAX® connectors are available in the 8 pin configuration, fully intermateable with the widely used CA-COM connectors. SPK SYNTAX® allow the conveyance of high electric power signal to professional loudspeakers. The design presents the same key features of SVK Series, and can be supplied with rubber covered locking ring and with gold plated solder-type contacts.
The SPK SYNTAX® connectors are solidly-built so to ensure long term reliability. Moreover, they do not present the shortcomings of older connectors still used in industrial or military environments.
SHD ROADLINE
Inline and panel versions available
The SYNTAX® SHD ROADLINE series is a newly conceived product, suitable for outdoor live performances (PA) and broadcasting (OB). SYNTAX® SHD ROADLINE is extremely robust, in compliance with Mil. C505 and VG 95234 military standards. This version has been enhanced to ensure long term reliability and increased number of mating cycles in rigorous conditions. It is also provided with bigger coupling roller pins for easier coupling. The increased thickness of the locking ring is meant to avoid ovalization caused by unintentional blows and supplied with enlarged rolling pins for easy mating. Deeper knurling on the hand grip and oversize locking ring also help better mating/demating. "Heavy duty" backshell is designed to ensure effective protection and easy wiring. All SYNTAX® SHD ROADLINE connectors are suited for outdoor applications being IP67 waterproof. Accessories, assembling tools and protection caps are supplied. Protection caps are directly laced to the backshell through a cord made up of 7 stainless steel strands protected by special anti scratch teflon tubing.
Different options are available to meet even the most demanding requirements. SYNTAX® SHD Roadline series is supplied in several configurations: 13, 19, 25, 37, 54, 85, 100 and 150 pins.
SPK SYNTAX® connectors are available in the 8 pin configuration, fully intermateable with the widely used CA-COM connectors. SPK SYNTAX® allow the conveyance of high electric power signal to professional loudspeakers. The design presents the same key features of SVK Series, and can be supplied with rubber covered locking ring and with gold plated solder-type contacts.
The SPK SYNTAX® connectors are solidly-built so to ensure long term reliability. Moreover, they do not present the shortcomings of older connectors still used in industrial or military environments.
Artikelnummer 09 38 006 2701
Beschrijving Han K 4/2 Pin Female Insert 4 80 Amp & 2
Type sheet PDFPDF
Identification
Category
Inserts
Series
Han-Com®
Identification
Han® K 4/2
Termination method
Screw termination
Version
Gender
Female
Size
16 B
Number of contacts
4
Additional contacts
+ 2 additional signal contacts
PE contact
Yes
Technical characteristics
Conductor cross-section
1.5 ... 16 mm²
Electrical data acc. to IEC 61984
80 A 830 V 8 kV 3
Rated current
80 A
Rated voltage
830 V
Rated impulse voltage
8 kV
Pollution degree
3
Electrical data, signal
16 A 400 V 6 kV 3
Rated current (signal)
16 A
Rated voltage (signal)
400 V
Rated impulse voltage (signal)
6 kV
Pollution degree (signal)
3
Rated voltage acc. to UL
600 V
Rated voltage acc. to UL (signal)
600 V
Rated voltage acc. to CSA
300 V
Rated voltage acc. to CSA (signal)
300 V
Contact resistance
? 0.3 m?
Contact resistance, signal area
? 1 m?
Limiting temperature
-40 ... +125 °C
Mating cycles
? 500
Flammability acc. to UL 94
V-0
Material properties
Material (insert)
Polycarbonate
Colour (insert)
RAL 7032 (pebble grey)
Material (contacts)
Copper alloy
Surface (contacts)
Silver plated
Net weight
118.4 g
RoHS
compliant with exemption
Specifications and approvals
Specifications
IEC 61984
EN 60664-1
Approvals
UL 1977 ECBT2.E235076
GL
Yes
SHD ROADLINE
Inline and panel versions available
The SYNTAX® SHD ROADLINE series is a newly conceived product, suitable for outdoor live performances (PA) and broadcasting (OB). SYNTAX® SHD ROADLINE is extremely robust, in compliance with Mil. C505 and VG 95234 military standards. This version has been enhanced to ensure long term reliability and increased number of mating cycles in rigorous conditions. It is also provided with bigger coupling roller pins for easier coupling. The increased thickness of the locking ring is meant to avoid ovalization caused by unintentional blows and supplied with enlarged rolling pins for easy mating. Deeper knurling on the hand grip and oversize locking ring also help better mating/demating. "Heavy duty" backshell is designed to ensure effective protection and easy wiring. All SYNTAX® SHD ROADLINE connectors are suited for outdoor applications being IP67 waterproof. Accessories, assembling tools and protection caps are supplied. Protection caps are directly laced to the backshell through a cord made up of 7 stainless steel strands protected by special anti scratch teflon tubing.
Different options are available to meet even the most demanding requirements. SYNTAX® SHD Roadline series is supplied in several configurations: 13, 19, 25, 37, 54, 85, 100 and 150 pins.
SPK and SVK are compliant with Mil C 5015 VG 95234 and are commonly used by many speaker enclosure manufacturers. They are available with rubber-covered or metal loocking rings. SPK connectors are fully intermateble with CA-COM connectors.