Features and Benefits
Push Pull mating design provides secure locking system if mated with NMK-20U*
Reversible USB-C housing
Front and rear side mountable
Guiding housing for better protection of receptacles
Neutrik Lockable USB Type-C chassis with integral USB IF approved receptacle
Technical Data
Product
Title NMC-C-HR
Electrical
Rated current per contact 5 A
Rated voltage 20 V
Transmission Performance null
Mechanical
Body Height 3.16 mm
Body Length 11.3 mm
Body Weight 9.7 mm
Orientation Right Angle
PCB Mounting HYBRID SMT+DIP
PCB surface center 1.58 mm
Version USB3.1 Gen.II
Lifetime 10'000 mating cycles
Locking force 50 N
Locking device Latch lock
Features and Benefits
Guaranteed performance up to 10 Gb/s (USB 3.1 Gen.II compatibility)*
Push Pull mating design provides secure locking system if mated with NMC-*
Reversible USB-C housing Provide power up to 100 W (@5A/20V)
Shielded connection – high noise immunity and EMI protection
Mates with conventional USB-C receptacles
Features and Benefits
Guaranteed performance up to 10 Gb/s (USB 3.1 Gen.II compatibility)*
Push Pull mating design provides secure locking system if mated with NMC-*
Reversible USB-C housing Provide power up to 100 W (@5A/20V)
Shielded connection – high noise immunity and EMI protection
Mates with conventional USB-C receptacles
The rear compatibility of opticalCON MTP® chassis fitting with standard MTP® (ELITE male)
The rear compatibility of opticalCON MTP® chassis fitting with standard MTP® (ELITE male) breakout cable allows easy adaptation to fiber standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance. The housing seal is used for color coding and IP protection.
Features & Benefits
•Ruggedized and dirt-protected 12-channel fiber optic connection system
•For point-to-point multichannel routing
•Laser protective metal shutter seals dust proof with two-component rubber gasket
•Dust and water resistant according to IP65 in mated condition
•Accommodates standard MTP® ELITE male connectors on the rear for simple installation
•Rubber sealing gasket (black, blue, green to identify fiber mode)
opticalCON MTP® breakout box: 1 x NO12FDW-A zu 3 x NO4FDW-A
The breakout boxes are used to split a 12-channel point-to-point opticalCON MTP® connection. In mated condition the boxes are dust and water resistant according protection class IP 65. The closed boxes are protected according to IP67.
Product NO12SABB3Q-A NO12MBB3Q-A
Fiber Mode single mode PC (APC MTP®) multi mode PC (MTP®)
Color Coding
Blue Black
Equipment, e.g.
- Camera connections
- Ethernet
- DVI/HDMI/KVM
- Audio Network
- DMX Network
- InterCom
- Data (RS232, 424)
opticalCON QUAD breakout box: 1 x NO12FDW-A to 6 x NO2-4FDW-A
The breakout boxes are used to split a 12-channel point-to-point opticalCON MTP® connection. In mated condition the boxes are dust and water resistant according protection class IP 65. The closed boxes are protected according to IP67.
Product NO12SABB6D-A NO12MBB6D-A
Fiber Mode single mode PC (APC MTP®) multi mode PC (MTP®)
Color Coding
Blue Black
Equipment, e.g.
- Camera connections
- Ethernet
- DVI/HDMI/KVM
- Audio Network
- DMX Network
- InterCom
- Data (RS232, 424)
opticalCON MTP® breakout box: 1 x NO12FDW-A zu 3 x NO4FDW-A
The breakout boxes are used to split a 12-channel point-to-point opticalCON MTP® connection. In mated condition the boxes are dust and water resistant according protection class IP 65. The closed boxes are protected according to IP67.
Product NO12SABB3Q-A NO12MBB3Q-A
Fiber Mode single mode PC (APC MTP®) multi mode PC (MTP®)
Color Coding
Blue Black
Equipment, e.g.
- Camera connections
- Ethernet
- DVI/HDMI/KVM
- Audio Network
- DMX Network
- InterCom
- Data (RS232, 424)
opticalCON QUAD breakout box: 1 x NO12FDW-A to 6 x NO2-4FDW-A
The breakout boxes are used to split a 12-channel point-to-point opticalCON MTP® connection. In mated condition the boxes are dust and water resistant according protection class IP 65. The closed boxes are protected according to IP67.
Product NO12SABB6D-A NO12MBB6D-A
Fiber Mode single mode PC (APC MTP®) multi mode PC (MTP®)
Color Coding
Blue Black
Equipment, e.g.
- Camera connections
- Ethernet
- DVI/HDMI/KVM
- Audio Network
- DMX Network
- InterCom
- Data (RS232, 424)
Chassis connector, black chromium plating, 4 solder contacts,…
Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65, front panel mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Not compatible to SMPTE 344M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Features & Benefits
•Suggested OEM equipment connector due to LC front compatibility
•Designed as feedthrough with automatic sealing shutter
•Shutter with silicone gasket protects optical connection from dust and dirt
•Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
•Accommodates standard LC connectors on the rear for simple installation
•Connection on the front side either by rugged opticalCON or standard LC connector
•The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
•Water resistant according to IP65 ingress protection in mated condition
•In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
•Color coded rubber sealing to identify fiber mode:
Multimode - black
Single mode PC - blue
Single mode APC - green
Chassis connector, black chromium plating, 4 solder contacts,…
Chassis connector with black chromium plating, 4 solder contacts and 1 LC-Duplex feedthrough socket, waterproof acc. to IP65, front panel mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Features & Benefits
•Suggested OEM equipment connector due to LC front compatibility
•Designed as feedthrough with automatic sealing shutter
•Shutter with silicone gasket protects optical connection from dust and dirt
•Accommodates standard LC connectors on the rear for simple installation
•Connection on the front side either by rugged opticalCON or standard LC connector
•The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
•Water resistant according to IP65 ingress protection in mated condition
•In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP 52.
•Color coded rubber sealing to identify fiber mode:
Multimode - black
Single mode PC - blue
Single mode APC - green
Chassis connector, black chromium plating, waterproof acc. to IP65
Chassis connector, black chromium plating, waterproof acc. to IP65, front panel mount.
The chassis connector acts as a "feed-through" allowing simplified installations by connecting four conventional LCs on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Features & Benefits
•Rugged 4-channel Point-to-Point multichannel routing solution
•Laser protected metal shutter seals dust proof with two-component rubber gasket
•Water resistant according to IP65 (mated), rubber sealing gasket
•Accommodates standard LC connectors on the rear for cost effective and simple installations
•Color coding to identify fiber mode:
Multi mode – black
Single mode PC – blue
Single mode APC – green
The breakout boxes are used to split a 4-channel point-to-point opticalCON QUAD connection. In mated condition the boxes are dust and water resistant according protection class IP 65. The closed boxes are protected according to IP67.
Product NO4MBB2D-A NO4SBB2-D-A NO4SABB2D-A
Fiber Mode multi mode PC single mode PC single mode APC
Color Coding
Black Blue Green
Equipment, e.g.
- Camera connections
- Ethernet
- DVI/HDMI/KVM
- Audio Network
- DMX Network
- InterCom
- Data (RS232, 424)
The breakout boxes are used to split a 4-channel point-to-point opticalCON QUAD connection. In mated condition the boxes are dust and water resistant acc. protection class IP 65. The closed boxes are protected according to IP67.
Product NO4MBB4D-A NO4SBB4D-A NO4SABB4D-A
Fiber Mode multi-mode PC single-mode PC single-mode APC
Color Coding
Black Blue Green
Equipment, e.g.
- Monitors
- Multiplex (send/return) signals
- Embedded signals (Audio + Video + Data)
2 pole 1/4" professional right-angle phone plug, nickel contacts, nickel shell
1/4" professional right-angle phone plug, 2 pole, nickel contacts, nickel shell
The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).
The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.
The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Features & Benefits
•All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
•Extra slim 1/4" plug for highest packing density
•Robust diecast shell in stylish design
•Proven chuck type strain relief for reliable cable retention
•Sleek design for best handling convenience
•Precision machined one-piece contacts - avoid hook up of tip contact
