This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colors.
SCDX – black (if used with opticalCON, black indicates multi-mode)
SCDX-5 – green (if used with opticalCON, green indicates single-mode APC)
SCDX-6 – blue (if used with opticalCON, blue indicates single-mode PC)
SCDX-9 – white (e.g. walloutlet)
Suitable for:
XLR D Series female
XLR D Series male
1/4" Jacks D Series
speakON NL2M* and NL4M*
powerCON 20 A Series NAC3MPA* and NAC3MPB*
powerCON TRUE1 NAC3MPX
USB NAUSB-W*
HDMI NAHDMI-W*
D-SUB NADB*
Firewire NA1394-6-W*
etherCON A&B Series
etherCON D Series
etherCON CAT6 Chassis Connectors
BNC D Series
Phono (RCA) Chassis Connectors
This original Syntax component is provided with a protective jacket to improve contactation on SSX 19 pin connector.
- improved electrical conductivity
- lower operating temperature
- self-centered for a seamless connection
- increased number of mating cycles
Crimp or Solder, Gold or Silver plated versions available.
This original Syntax component is provided with a protective jacket to improve contactation on SHD series connector.
Improved electrical conductivity Self-centered for a seamless connection.
Lower operating temperature Increased number of mating cycles
This original Syntax component is provided with a protective jacket to improve contactation on SHD series connector.
Improved electrical conductivity Self-centered for a seamless connection.
Lower operating temperature Increased number of mating cycles
Panel speakON 4 pole chassis, black D-size, countersunk screw holes, 3/16" flat tabs
This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 61984.
4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs.
The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.
Features & Benefits
IEC 61984 certified > IEC 62368-1 compliant
Glass reinforced V-0 materials make it extremely robust and dependable
Precise keyway for secure mating
Accurate twist lock latching system
Metal insert in locking area
Airtight design - optimized for speaker applications
Artikelnummer 09 33 000 6222
Beschrijving Han E FEMALE CRIMP CONT.AU 0.5
Type sheet PDFPDF
Identification
Category
Contacts
Series
Han E®
Type of contact
Crimp contact
Version
Gender
Female
Contact identification
No groove
Technical characteristics
Conductor cross-section
0.5 mm²
Conductor cross-section
AWG 20
Operating current
? 16 A
Contact resistance
? 1 m?
Stripping length
7.5 mm
Material properties
Material (contacts)
Copper alloy
Surface (contacts)
Gold plated
Net weight
1.5 g
RoHS
compliant with exemption
Specifications and approvals
Specifications
IEC 61984
EN 60664-1
NEUTRIK etherCON RJ45 cable conn. carrier for non pre-assembled RJ45 plugs
Cable connector carrier consists of a shell, fixing disk, chuck and boot. The boot (same as XLR X-Series) is suitable for cable diameters from 3.5 - 8 mm. For non preassembled cables only. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Features & Benefits
•The RJ45 system for harsh and demanding environment
•Cable connector carrier accepts the most common RJ45 plugs (see list at downloads)
•Rugged diecast shell and unique chuck type strain relief
•Protects Ethernet connections in a variety of commercial type applications and is designed to prevent breakage of the fragile components of standard RJ 45 connectors
•O-ring gasket to achieve IP54 water protection in combination with SE8FD sealing kit
•Accessories include color coded boots in 9 standard colors
Cable connector carrier consisting of black chromium shell, fixing disk, chuck and boot
Cable connector carrier consists of a black chromium shell, fixing disk, chuck and boot. The boot (same as X-Series) is suitable for cable diameters from 3.5 - 8 mm. For non preassembled cables only. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Features & Benefits
•The RJ45 system for harsh and demanding environment
•Cable connector carrier accepts the most common RJ45 plugs (see list at downloads)
•Rugged diecast shell and unique chuck type strain relief
•Protects Ethernet connections in a variety of commercial type applications and is designed to prevent breakage of the fragile components of standard RJ 45 connectors
•O-ring gasket to achieve IP54 water protection in combination with SE8FD sealing kit
•Accessories include color coded boots in 9 standard colors
3 pole male cable connector, Nickel housing, silver contacts, without boot
3 pole male cable connector with Nickel housing and silver contacts.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
Features & Benefits
•Male connector with improved locking recess without "window", more stringent housing increases durability
•Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
•Boot with polyurethane gland gives high protection to cable bending stresses
•Colored rings and boots available for coding or identification
•Sleek and ergonomic design - valuable and handy
•Rugged zinc diecast shell, longlasting and dependable
•Internal thread on shell is well protected against any damage
•Branded with unique hologram - guarantees genuine and authentic Neutrik product
